Key Features:

• Underwater Application: Specifically designed for quick repairs underwater, making it ideal for fixing pool liners, pool covers, and inflatables without draining the pool.
• Easy to Use: The adhesive-backed patch is simple to apply, requiring no tools or special preparation - just peel, stick, and press for an instant repair.
• Clear Design: The clear patch blends seamlessly with your pool liner or inflatable, making it virtually invisible after application.

Instructions for Use:

1. Clean the Area: Ensure the damaged area is clean and dry. Remove any debris, dirt, or oils from the surface to ensure the patch adheres properly.
2. Trim the Patch (if needed): If the patch is too large, trim it to fit the damaged area, ensuring it covers the entire tear or hole.
3. Peel the Backing: Peel off the backing from the adhesive patch to expose the sticky side.
4. Apply the Patch: Firmly press the patch onto the damaged area, smoothing out any wrinkles or air bubbles. Make sure it is securely attached to the surface.
5. Allow to Set: Allow the patch to set for at least 30 minutes before allowing the area to be submerged again. For full bond strength, wait 24 hours before using the pool or inflatable.

Warranty Coverage: Bestway Adhesives come with a 30 Day Limited Manufacturers Warranty. The manufacturer warrants their plumbings & fittings against defects on workmanship and materials. This warranty will be void if the plumbing/fitting is damaged as a result of improper installation or use, or if damage is a result of ice. Warranty does not cover any labour charges, cost of lost water or chemicals, or any other damages that may occur.