Overlap swimming pool liners hang over the pools wall, and are then secured to the top of the wall using plastic coping (click here to purchase new/replacement coping for your pool). You then place the top rail of the pool over the coping to fasten it into place. Our overlap liners work with constant depth pools, and with pools that have 48” or 52" wall heights. After connecting the liner, any excess material is to be rolled up, or cut off for a clean finish.
This liner will work on flat bottom profiles and will also work with dished pools of up to 8 inches. This liner is designed for the size of pool specified in the product name.
*Please Note: This liner will not fit a pool with an expandable bottom or deep end*
Note: Due to the nature of various monitors, video cards and settings, colours shown on the site may vary slightly.
PLEASE NOTE: Liners also come with a DO NOT DIVE sticker that MUST be placed 2 inches above the water level - It is imperative that this sticker is visible to all swimmers.
Warranty Coverage: Above Ground Liners come with an excellent 15 Year Prorated Manufacturers Warranty. The manufacturer warrants this liner to be free of defects in the seam. Separation of the seam is considered a manufacturing defect. Tears, punctures, pattern loss and colour fading are not a manufacturing defect, thus not covered under warranty. Warranty does not cover any labour charges, cost of lost water or chemicals, or any other damages that may occur.
Please log in to write a review:
Enter your postal code to check your area.