The Boxer Vinyl Patch Kit Includes:
Application Instructions:
All surfaces must be clean. Cut round corners on patch. For inflatables and light gauge vinyls apply adhesive to patch sparingly and press tightly to the surface that is to be repaired. Allow to dry for 24 hours. A face mask or underwater goggles should always be used when going underwater to make repairs.
For Deep Underwater Repairs:
Cut round corners on patch. Apply adhesive to patch and fold patch over upon itself. When you reach the damaged area underwater unfold the patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb patch for at least 48 hours. Allow 4-7 days for full cure.
Warranty Coverage: Boxer Adhesives Plumbings & Fittings come with a 30 Day Limited Manufacturers Warranty. The manufacturer warrants their plumbings & fittings against defects on workmanship and materials. This warranty will be void if the plumbing/fitting is damaged as a result of improper installation or use, or if damage is a result of ice. Warranty does not cover any labour charges, cost of lost water or chemicals, or any other damages that may occur.
Start a Warranty Claim:To begin a claim please email customerservice@poolsuppliescanada.ca with a photo showing the defect(s)/damage to your Boxer Adhesives Plumbing/Fitting and include a brief explanation of what occurred.
Great product to patch up small tears or leaking spots in your pool liner. Surprisingly it actually does work under water but if you have to put the patch in an area that is deeper than 3 feet you may have a bit of a problem positioning the patch correctly. I used a snorkel to stay under the water but my wife had to hold me down when I made my second attempt to place a second piece of glued vinyl. It’s been a week now and the patch is still there !!!! Would definitely recommend this product.
5 stars on this patch kit. Lots of vinyl patch inside for future issues and the glue is really good.
Please log in to write a review:
Enter your postal code to check your area.