All above ground pools need a cove. Read any pool manufacturer's installation instructions and it will tell you that the cove is a vital structural element of your pool. A cove is needed to prevent the weight of the water from causing the pool liner to balloon out under the bottom of the pool wall. Previously pool cove had to be hand built in place, using tons of sand or dirt. Liner failures due to cove washout were all too common. Corrosion occurred rapidly where metal components at the bottom of the pool came in contact with moisture in the sand or dirt. Hand formed coves are also uneven making cleaning difficult.
Gladon original cove is a 3 inch by 4 inch preformed cove made from chemically neutral closed ethafoam and is safe for use with all pool liners. Lightweight and easy to handle, Gladon original cove comes in 48 inch long sections that bend easily without breaking and are compatible with all pool brands. Its unique plastic backing strip makes it easy to install in most makes of pools. The plastic backing strip locks each section of cove into the bottom rail, allowing it to move as the pool wall expands and contracts. Unlike sand or dirt, Gladon original cove cannot be washed out and will not hold moisture against metal components. This leads to reduced corrosion and may add years of life to a pool and its components. Because Gladon original cove is made from a 2lb high density foam it will not change shape or indent, making pool cleaning easier.
Pool Size Number of Cove Sections Required
ROUND SIZES
OVAL SIZES
Warranty Coverage: Gladon Pool Coves come with a 30 Day Limited Manufacturers Warranty. The manufacturer warrants these Pool Coves against defects on workmanship and materials. This warranty will be void if these Pool Coves are damaged as a result of improper installation or use, or if damage is a result of ice. Warranty does not cover any labour charges, cost of lost water or chemicals, or any other damages that may occur.
Start a Warranty Claim:To begin a claim please email customerservice@poolsuppliescanada.ca with a photo showing the defect(s)/damage to your Gladon Pool Coves and include a brief explanation of what occurred.
Worked as advertised
Very easy to install and the glue backing easily stuck in place prior to installing the liner.
After installation my robotic pool cleaner climbs the wall like it is supposed to. Easy to install would purchase again
2 didn't stick but we were using the spray blue glue also and they worked perfect...
Works great
Adhesive backing has been improved, needed to make an adjustment and was stuck on good.
Great product, stick could be a little stronger, but overall easy to use.
Really easy to install recommend a can of the gladon wall foam glue for easy instal as the self stick isn’t that great
Works great. Easy to install. Highly recommend!!!
It did the job, the back side glue needs to be more effective.
Easy to install.
I think they are a great idea. The pool installers from Trevi refused to use it stating pool warranty issues. It was puzzling but I couldn’t argue.
The solution on the back was not sticky enough to hold in place. However they served the purpose
Merveilleux. Finition parfaite
Great time saver
Great product to use. Easy
Easy installation Great product
Nice to work with, could be more sticky, need duct tape to hold in place if using floor pad and wall foam
Very easy to install, made a nice consistent cove.
Fast delivery, easy ordering
Works as it should
Very easy to install. As decribed
Great and easy to install
Good Shipping and product!
A must get for any pool. Will always last and fits nicely.
Was excellent product and made setting pool base so easy
Haven't installed them yet but feels and looks like a great product.
Perfect just what was needed
100% recommend getting this item for your pool
Please log in to write a review:
Enter your postal code to check your area.