Weld-On IPS P-68 Primer

Key Features:

• Surface Preparation: Designed to clean and prepare PVC, CPVC, and ABS pipe surfaces for better bonding with solvent cement.
• Fast-Drying: Dries quickly to allow fast application of solvent cement, saving you time on your projects.
• Clear Finish: The clear formula ensures clean, discreet application that doesn't leave stains or marks on your pipes.
• Reliable Bonding: Provides a secure, leak-proof bond by promoting the adhesive properties of the solvent cement.

Steps for Use:

1. Prepare the Pipe: Ensure the pipe and fitting surfaces are clean and dry before applying the primer.
2. Apply the Primer: Using a clean applicator, apply a thin, even layer of IPS P-68 Primer to the pipe and fitting surfaces to be joined.
3. Allow to Dry: Let the primer dry for a few seconds until it becomes tacky. Ensure proper coverage for optimal bonding.
4. Apply Solvent Cement: After applying the primer, immediately apply the appropriate solvent cement to both the pipe and fitting.
5. Join the Pipe and Fitting: Insert the pipe into the fitting, giving a slight twist to ensure an even bond, and hold in place for a few seconds.
6. Let the Joint Cure: Allow the joint to cure for the recommended time. Wait at least 15 minutes before handling and 24 hours for full strength.

Warranty Coverage: The IPS P-68 Primer comes with a 30-day limited manufacturer’s warranty. The manufacturer warrants this product against defects in material or workmanship. The warranty is void if the product is misused, improperly applied, or exposed to extreme conditions such as freezing or excessive heat. This warranty does not cover labor charges, lost water, or other indirect damages.