Standard bead liners (also known as Snap Bead) are installed using bead retainer coping which hangs directly on the pool wall and receives the liner bead. The liner tucks/snaps into place on the large lip of the coping and is fed all the way around the pool. The coping is then secured into place when the Stabilizer track/tubing is placed on top of it.
Note: Liner will accommodate any flat bottom above ground pool and any pool bottom gradually dished to a maximum of 8 inches in the centre. This liner will not function with an expandable bottom/deep end.
Liners are designed to “Standard Specification“ which will fit to the true size stated in the description. Be certain to measure your pools dimensions properly to ensure a proper fit. Tip: Measure from wall to wall for proper length, width and height.
Please log in to write a review:
Enter your postal code to check your area.